Release Notes

Current Versions

Anka Virtualization CLI 2.5.6 (2.5.6.147) - June 29th, 2022

Important considerations for this release
Upgrading Addons from the previous patch version of anka is recommended but not fully required.

For more details, take a look at our [pre-upgrade considerations](/intel/upgrading/#pre-upgrade-considerations).

Bug Fix: anka registry pull would under certain conditions throw ZeroDivisionError: float division by zero.
Bug Fix: anka run was not sourcing the shell profile files and interpolating variables. (requires addons upgrade)
Bug Fix: Duplicate vnc_port field in the anka --machine-readable show output.
Bug Fix: Inability to use .app installers with anka create when they’re stored in /tmp.
Improvement: Support for Ventura (13.0).
Improvement: Port forwarding rewrite allowing for more network/communication stability.

Previous Versions

Anka Virtualization CLI 2.5.5 (2.5.5.143) - April 19th, 2022

Important considerations for this release
This is a patch for the existing 2.5.5.142 release.
Upgrading Addons from the previous minor version of anka is recommended but not required.

For more details, take a look at our [pre-upgrade considerations](/intel/upgrading/#pre-upgrade-considerations).

Bug Fix: Continued: anka run hangs when executing a command.
Improvement: anka registry --machine-readable check-download-size now returns a boolean instead of “yes” or “no”.

Anka Virtualization CLI 2.5.5 (2.5.5.142) - April 11th, 2022

Important considerations for this release
Upgrading Addons from the previous minor version of anka is recommended but not required.

For more details, take a look at our [pre-upgrade considerations](/intel/upgrading/#pre-upgrade-considerations).

Bug Fix: anka cp and anka run hang when executing + ankactl: communication error: Operation timed out errors after resuming VMs (addons upgrade required).
Bug Fix: When two pulls are happening on the same machine for the same template and tag, it can sometimes cause a failure with anka: no such version.
Bug Fix: Rarely anka registry pull would become stuck.
Bug Fix: When the machine’s disk was full, anka registry pull would report 100%/successfully pulled.
Bug Fix: The Anka uninstaller was deleting the controller package installed on the same machine.
Bug Fix: anka registry pull speed limitations fixed/removed.
Bug Fix: anka registry pull can fail with could not create disk image, status 74. and then subsequent pulls immediately show 100%. This results in a broken VM.
Bug Fix: Network/IP detection can very rarely choose the wrong IP on 11.6.4 VMs.
Bug Fix: block_nocache was not working properly.
Improvement: Network isolation now support bridged networking VMs (anka modify VMNAME set network-card --no-local).
Improvement: Monterey VM performance.
New Feature: anka show now displays cpu usage from inside of the VM

Previous Versions

2.5.4 (2.5.4.138) - Dec 27th, 2021

Important considerations for this release
Upgrading Addons from the previous minor version of anka is recommended but not required.
Suspended VMs created in previous minor versions of anka are not compatible and will need to be force stopped (anka stop --force), started, and then re-suspended post-upgrade.

For more details, take a look at our [pre-upgrade considerations](/intel/upgrading/#pre-upgrade-considerations).

Bug Fix: Automatic creation of anka image storage directories was not happening for config defaults and caused the agent to be unable to create VMs.

2.5.4 (2.5.4.136) - Dec 10th, 2021

Important considerations for this release
Upgrading Addons from the previous minor version of anka is recommended but not required.
Suspended VMs created in previous minor versions of anka are not compatible and will need to be force stopped (anka stop --force), started, and then re-suspended post-upgrade.
Avoid upgrading to this version on nodes with running VMs.

For more details, take a look at our [pre-upgrade considerations](/intel/upgrading/#pre-upgrade-considerations).

Bug Fix: anka list was not sorted by name.
Bug Fix: Race condition throws “not found” when anka clone and anka delete happen at the same time.
Bug Fix: VMs created with the name “11.6” throw a failure.
Bug Fix: Anka registry list command fails with key values mismatch when using self signed certs.
Bug Fix: Machine readable stop_date is in a bad format for parsing (causing day out of range)
Bug Fix: Machine readable status differ between list and show commands.
Bug Fix: anka create suddenly throwing hdiutil: attach failed - Resource busy error.
Bug Fix: anka license show -k {license} doesn’t display proper host based license information.
Bug Fix: Unable to use change_res binary on Big Sur, Monterey, and PG enabled VM templates.
Bug Fix: On machine boot, anka_agent is running and executing anka list which triggers creation of *_lib directories. This was causing network mounts (which happen after the agent runs) to try using the same location, failing to because they already exist, and instead mounting with a different name. This caused anka list to be empty after a reboot. We removed the creation on anka list which will give enough time for network mounts to claim the path.
Bug Fix: The anka uninstaller script was removing a locally installed controller package.
Improvement: Monterey VM creation will automatically set ablk as the disk controller (virtio-blk not supported currently).
Improvement: Support for 32 core machines.
Improvement: We now check the registry status/availability before creating a local tag. This should prevent situations where a local tag was created prematurely and then blocked subsequent commands (requiring either a manual deletion of the local tag, or a force push).
New Feature: You can now find the last used date/time of a VM/Template using the access_date key/value.
This release includes support for 12.1 beta.

2.5.3 (2.5.3.135) - Sep 23rd, 2021

Suspended VMs in 2.4.X are not compatible and will need to be force stopped (anka stop –force), started, and then re-suspended post-upgrade.

Upgrading Addons from the previous version of anka is recommended.

Avoid upgrading the anka package to 2.5.X on nodes with VMs running.

Bug Fix: Apple’s automatic software update/download is enabled for newly created VMs. This was causing a problem where the new macOS version installer .app was being downloaded each time a VM was started.
Bug Fix: VMs randomly crashing with failed to get pid: Socket is not connected
Bug Fix: anka config default_passwd returning 245 exit code
Bug Fix: VM suspension logic was producing stopping VMs
Bug Fix: Date strings in anka list have overflow in minutes and seconds fields

Known issues we’re working on fixes for:
Creating a VM Template with the name of 11.6 seems to throw not found errors when trying to push, clone, etc.

2.5.2 (2.5.2.133) - Sep 13th, 2021

Upgrading Addons from the previous version of anka is not necessary. We do however recommend upgrading addons if you’re on a previous minor or major version of the CLI.

Bug Fix: anka list -f ram was showing human readable values, vs the bytes output
Bug fix: Addons < v2.3.X were not showing properly
Bug Fix: Modifying network card was setting no_local to true
Bug Fix: Updating addons on Mojave hosts was failing
Bug Fix: PG enabled VMs were throwing failures on start
Improvement: Deprecation notice added for anka create --profile as it no longer works on macOS versions greater than Catalina

License pass-through for the Anka CLI is not longer available for VMs with Big Sur macOS or higher.

2.5.1 (2.5.1.132) - Aug 30th, 2021

Upgrading Addons from the previous version is not necessary

Bug Fix: anka run --env was not working
Bug Fix: anka list -f was not working
Bug Fix: anka start --usb was not working
Bug Fix: sudo anka view was not working

2.5.0 (2.5.0.131) - Aug 19th, 2021

Upgrading Addons from the previous version is recommended. Suspended VMs on 2.4.X seem to be problematic when starting on 2.5.X.

10.14.X does not contain the necessary Apple APIs to work with 2.5.X of Anka. You will need to upgrade macOS for your hosts to use 2.5.X.

Bug Fix: Inability to create or start Anka VMs over SSH (no active UI) or as the ec2-user/non-root users on AWS EC2 Mac
Bug Fix: Inability to run more than one VM on AWS EC2 Mac
Bug Fix: Startup scripts through the controller API fail due to slow network/DHCP setup
Bug Fix: Anka run doesn’t source all available bash/profile source files for the user, only the first. It will now source all files in the following order: /etc/profile, .bash_profile, .bash_login, .profile.
Improvement: Expanded Nested Virtualization to support Android Emulators and Virtualbox + refactored Docker support for modern macOS versions. Nested Virtualization is only possible on Big Sur hosts and Big Sur or Catalina VM versions. | Documentation
Improvement: anka show now supports several new commands: anka show {VMNAME} network, anka show {VMNAME} disk, and anka show {VMNAME} tags | Documentation
Improvement: anka show is now possible for specific local tags | Documentation
Improvement: anka delete {template}:{tag} has been replaced with anka delete {template} --tag {tag} | [Documentation]({{ relref “intel/Whats New/_index.md#previous-tag-deletion-method-has-been-replaced” }})
Improvement: You can now suspend VMs that have PG display enabled
Improvement: anka create can now be done in multiple stages so MDM can target the VM to apply profiles on creation | Documentation
New Feature: anka stop now detects if VM is unresponsive and issues forceful stop
New Feature: Ability to control VM display frame rate with anka modify {VMNAME} set display --fps 30 (defaults to 30) | Documentation
New Feature: Monterey Beta VM support
Fuse will no longer be installed within newly created VMs

Known Issues we’re working on fixes for:
Several command flags are not functioning properly in this version. Examples: anka run --env/--env-file, anka start --usb/-d, and anka list -f
sudo anka view or anka view as root seems to have stopped working.
anka list -f ram shows human readable values instead of bytes
anka start -u does not work on Mojave hosts

2.4.1 (2.4.1.130) - Apr 19th, 2021

Upgrading Addons from the previous version is NOT necessary

Improvement: Preliminary 11.3 support
Bug Fix: Machine-readable output is sometimes empty
Bug Fix: Block deallocation logic fails on some guest images
Improvement: If available, anka registry pull will now revert to/use the local copy of your template/tag and avoid making a network pull/connection
Improvement: If a template with a certain name exists on your machine/node, but doesn’t match the UUID of the template with the same name in the registry, we are now blocking you from pulling the template from the registry to prevent duplicates
New feature: anka config now contains delete_logs which, if set to False, will keep /Library/Logs/Anka/{UUID}.log files around even after deletion of the VM

2.4.0 (2.4.0.129) - Mar 31st, 2021

Upgrading Addons from the previous version is necessary

New Feature: (improved security) VM network isolation when using shared type network-card. This also means that any access to the host also blocked (192.168.64.1).
New Feature: Pushing and pulling from the registry is now chunked.
Improvement: Suspended VMs that fail to start for a temporary issue will not become corrupted anymore. This allows a second start to happen without having to re-pull the suspended VM again from the registry.
Improvement: Anka clone now preserves the source VM creation date.
Bug Fix: Anka run suddenly throws -anka: communication timeout
Bug Fix: When /var/tmp/ankafs.0 is created as one user, and another user in the VM tries to use it, it fails with Permission Denied
Bug Fix: ENVs passing into the VM using anka run --env throw -anka: communication timeout
Bug Fix: RealVNC client crash
Bug Fix: Whenever multiple creations are run in parallel with packer, it will fail with hdiutil: attach failed - Resource busy

2.3.4 (2.3.4.128) - Mar 2nd, 2021

Bug Fix: Default VNC (running on 590X ports) was frozen
New Feature: Ability to set anka modify VmName set network-card 0 --direct-mac and expose the MAC address to the Host so that DHCP can assign the proper IP (requires bridged mode)

Upgrading Addons from the previous version is not necessary

2.3.3 (2.3.3.127) - Feb 3rd, 2021

Improvement: New low latency timer emulation logic (performance)
Bug Fix: anka cp symlink copying produces corrupted links
Bug Fix: VM resume instability
Bug Fix: ankanetd was found to crash on older Mac Pros
New Feature: License Fulfillment ID is now visible from anka license show
New Feature: anka config options to modify Apple’s mitigations on host.

Please update addons for your Templates and Tags.

NEW IN 2.3: anka mount and the automated current directory mounting for anka run are not available by default with Big Sur VMs. You can install addons using anka start -o addons 11.0.X and then choosing Legacy addons under the installer Options to enable them, but it requires manual approval/steps through the GUI.

Known issue: 11.2 no longer supports the deprecated FUSE drivers. This could impact packer versions <= 1.6.1. Packer version 1.7.0 will support anka cp instead.

Known issue: anet network card does not work for Big Sur VMs. You need to switch to anka modify {vmName} set network-card -c virtio-net

2.3.2 (2.3.2.125) - Jan 12th, 2021

Improvement: Refined –help messages for CLI
Improvement: VM Networking speeds and stability
New Feature: Support for PG graphics (“Metal”) devices in the VM
Bug Fix: It’s possible that the ankarund process can fail due to other software requesting access to usb devices inside of the VM. This was causing anka run to not function.
Bug Fix: ENVs with special characters were causing non CF convertable type passed errors on the CLI.
Bug Fix: Failed to find bundle for accelerator bundle named: AnkaMTLDriver errno: 0 was displaying in simulator logs, causing CI/CD to fail. (addons update required)
Bug Fix: 10.14 wasn’t allowing nested virtualization
Bug Fix: Running anka --machine-readable license show on a machine without a license throws an error

Upgrading Addons from the previous version is necessary

NEW IN 2.3: anka mount and the automated current directory mounting for anka run are not available by default with Big Sur VMs. You can install addons using anka start -o addons 11.0.X and then choosing Legacy addons under the installer Options to enable them, but it requires manual approval/steps through the GUI.

Known issue: PG and Nested Virtualization are not compatible.

2.3.1 (2.3.1.124) - Dec 3rd, 2020

New Feature: You can now anka delete {vmName}:{tagName} in order to remove the tag LABEL from your VM. However, this does not remove the STATE of the tag from the VM, allowing you to create a new tag without losing the previous tag’s config, installed dependencies, etc.
Bug Fix: Hostmachines running 10.13.6 were locking up when executing anka run and anka cp on them
Bug Fix: Incorrect DHCP handling logic caused random IP to be assigned to VM
Bug Fix: anka modify set custom-variable sys.csr-active-config 0 doesn’t work as expected

NEW IN 2.3: anka mount and the automated current directory mounting for anka run are not available by default with Big Sur VMs. You can install addons using anka start -o addons 11.0.X and then choosing Legacy addons under the installer Options to enable them, but it requires manual approval/steps through the GUI.

2.3.0 (2.3.0.122) - Nov 24, 2020

New Feature: A free, but limited, license for developers and small teams (on by default)
New Feature: Anka App now has a management UI where you can stop, start, delete, and create VMs
New Feature: Anka Viewer now prompts you, when you try to close the window, whether you want to stop the VM or keep it running in the background
New Feature: anka create support for Big Sur (avoiding having to upgrade Catalina)
New Feature: anka cp is replacing our older anka mount and automatic mounting for anka run due to changes Apple has made in Big Sur.
New Feature: Ability to control hostname inside of VM with propagate_name config option and ANKA_HOSTNAME env variable
New Feature: Bridged network modes now support VLANs with the anka modify --vlan option
Change: anka create default CPU, RAM, and DISK are now:
- CPU: (totalVirtualCPUCount / 2) with a min of 2 and a max of 8
- RAM: (totalRamAvailable / 2) with a min of 2GB and a max of 8GB
- DISK: 128G (137438953472)
Configurable with anka config
Bug Fix: Suspending a VM with a mounted disk (anka start -o) will cause it to fail on boot
Bug Fix: Inability to interrupt anka registry pull
Bug Fix: License activation didn’t work on Big Sur host
Bug Fix: Reboots from within VM sometimes show a black screen
Bug Fix: Unable to upgrade 10.14 VM to 10.14.1

NEW IN 2.3: anka mount and the automated current directory mounting for anka run are not available by default with Big Sur VMs. You can install addons using anka start -o addons 11.0.X and then choosing Legacy addons under the installer Options to enable them, but it requires manual approval/steps through the GUI. Catalina will still receive the older drivers.

Known Issues:
With Big Sur VMs, DHCP/IP assignment seems flakey and will cause a random IP to be applied.

2.2.3 (2.2.3.118) - May 03, 2020

Bug Fix: Starting multiple VMs from suspended state with bridge networking configuration
Bug Fix: Unable to set up port forwarding to 127.0.0.1
Bug Fix: VNC connection error
Bug Fix: DHCP bug related to renew lease in some Anka environment
Bug Fix: anka VMs can get corrupted when using nanka kext in cases of force shutdown
Bug Fix: Trying to start a VM result in failed state - with logs saying bind: Address already in use
New Feature: When using Anka Viewer, after clicking the green full screen button on the window’s top bar, it’s unclear how to get out of full screen. Now, if you move your mouse to the top of the screen you will expose the bar and green button.
New Feature: Updated license terms
There is no requirement to upgrade the VM templates from previous anka version 2.2.2 to version 2.2.3.

2.2.2 - Mar 03, 2020

Bug Fix: Nested virtualization not working since rel 2.2.0
Bug Fix: Anka command failed: time data ‘2020-02-27T03:52:23Z’ does not match format ‘%d %b %Y %H:%M:%S’
Bug Fix: license pass-through from root VM to nested VM doesn’t work
Bug Fix: anka run sources both .bash_profile and .profile. Requiresanka start -u for existing VM templates.
Bug Fix: after rebooting a running vm with anka run VM sudo reboot`, network doesn’t work.
New Feature: Allow to specify display physical(DPI) parameters. Requires anka start -u for existing VM templates.

There is no need to upgrade the VM templates from previous anka version 2.2.1 to version 2.2.2, unless you need to use the items from the above list which explicitly state the requirement of anka .

2.2.2 - Mar 03, 2020

Bug Fix: Nested virtualization not working since rel 2.2.0
Bug Fix: Anka command failed: time data ‘2020-02-27T03:52:23Z’ does not match format ‘%d %b %Y %H:%M:%S’
Bug Fix: license pass-through from root VM to nested VM doesn’t work
Bug Fix: anka run sources both .bash_profile and .profile. Requiresanka start -u for existing VM templates.
Bug Fix: after rebooting a running vm with anka run VM sudo reboot`, network doesn’t work.
New Feature: Allow to specify display physical(DPI) parameters. Requiresanka start -u for existing VM templates.

2.2.1 - Feb 24, 2020

Bug Fix: RFB server crash 0x0000000104fa0b8c rfb_thr + 1364
Bug Fix: Crash on suspend
Bug Fix: ankactl doesn’t report vnc_password string
Bug Fix: Anka VM fails to start under jenkins master account
Bug Fix: Anka run –wait-network doesn’t seem to work
Bug Fix: set resolution from anka view doesn’t work.
Bug Fix: Anka version takes a few minutes to respond
Bug Fix: ankactl experiences EMFILE if there are many snapshots/vms in the library
Bug Fix: Adding MAC address using anka modify for bridge cards result in corrupted config file for VM
Bug Fix: Collision of anka and guest addons files
Bug Fix: VNC not working for when resolution of VM is changed to 1000*600
Bug Fix: Problems to detect IP address
Bug Fix: VM doesn’t get unique IP address if static MAC address specified
New Feature: Support IPv6 in anka rfb server
New Feature: Allow to assign MAC address to VM
New Feature: Create directories if missing with anka run –workdir (requires anka start -u)
New Feature: Send HID events programmatically (requires anka start -u)
New Feature: Create RFB threads on demand only
New Feature: Give proper message in case of a VM trying to access out of range memory

2.2.0 - Jan 10, 2020

Bug Fix: vmnet fails to create interface
Bug Fix: Network error (discovered while stress testing)
Bug Fix: anka clone doesn’t randomize MAC addresses
Bug Fix: Samsung Galaxy S9 claim leads to host panic
Bug Fix: anka registry pull doesn’t take in scope cache size when determining free space
Bug Fix: nvram values don’t get saved
Bug Fix: Not possible to start more than one VM without GUI session
Bug Fix: vmnet fails to create more than few instances of virtual interfaces without GUI session
Bug Fix: Exceeding host based license message is missleading
Bug Fix: mDNS requests looks fail from inside VM
Bug Fix: Shared folders work bad for GUI usecases
Bug Fix: vmnet doesn’t restore network connectivity after host sleep
Bug Fix: Android devices aren’t recognized in Android Studio
Bug Fix: The source command doesn’t pickup changes in PATH environment. (requires anka start -u for the VMs)
Bug Fix: Anka.pkg downgrades AnkaAgent.pkg
Bug Fix: Bad product type for Anka Build Lite
Bug Fix: Anka run –wait-network doesn’t seem to work
New Feature: Install AnkaView into /Applications
New Feature: Allow to modify networking type of suspended VM
New Feature: Allow to create VM with manual install process
New Feature: Allow to start VMs via AnkaView interface
New Feature: Support output fields list customization
New Feature: Implement bridge support with new vmnet functionality
New Feature: Allow to claim/release USB devices by Serial Number
New Feature: Allow to select the bridge interface automatically
New Feature: MAC address sync
New Feature: Static IP addresses support (requires anka start -u for the VMs)
New Feature: Performance optimization
Other: Remove vlaunch
Other: Move ankanetd service to unix domain
Other: Allow to create more than 4 anka vmnet interfaces
Other: Integrate new VTUFS 3.10.4 (requires anka start -u for the VMs)
Other: Changes to licenses

2.1.2 - Oct 10, 2019

Bug Fix: SSH is not turned ON by default on Catalina guests

2.1.1 - Sep 25, 2019

Bug Fix: networking in Anka VMs doesn’t work in Catalina beta 8. User reported issue.
Bug Fix: License auto renewal doesn’t work.
Bug Fix: anka run -N sometimes fail to wait for network properly.

2.1.0 - Aug 21, 2019

Bug Fix: Starting VM with USB device could interfere with previously assigned device
Bug Fix: Anka View doesn’t allow to drag with mouse
Bug Fix: Guest hangs after host sleep
Bug Fix: Shared folders doesn’t work on Catalina
Bug Fix: Pasteboard policy isn’t indicated in GUI
Bug Fix: Anka Secure license is being processes with core rules
Bug Fix: Kernel panic in VeertuNet
Bug Fix: anka stop doesn’t trim encrypted drives
Bug Fix: Display doesn’t return to full screen after restart
Bug Fix: Pasteboard policy isn’t indicated in GUI
New Feature: Support hot plug of USB devices
New Feature: Allow to specify relative paths in anka run -w option
New Feature: Allow to control pb paste and copy operations independently
New Feature: Updated EULA and acknowledgements

2.0.1

Supports multiple license types for different products. Anka Build Basic, Anka Build Enterprise, Anka Build Enterprise Plus, Anka Flow, Anka Secure
Bug Fix: Catalina beta 3 reboot/start error on anka create
Bug Fix: Anka Flow license uses core based fulfillments
Bug Fix: anka license show crashes
Bug Fix: Same IP address is being assigned to bridged VMs
Bug Fix: mmap files are not being deleted

2.0

Bug Fix: Sometimes VM fails to resume with error accessing state file
Bug Fix: Bad serialization to YAML
Bug Fix: Suspend failed
Bug Fix: Anka view crashes on copy/paste operation
Bug Fix: Hang on resume
Bug Fix: macOS boot stuck sometimes
Bug Fix: Problem in image/state deletion
Bug Fix: Unaligned disk access
Bug Fix: Guest kernel panic
Bug Fix: Anka View Crash
Bug Fix: libosxfuse has loading problems due to Library Validation
Bug Fix: RealVNC client crashes ankahv
Bug Fix: Berry doesn’t load on 10.12
Bug Fix: Guest kernel panics on resume
Bug Fix: Can’t attach more than one USB device
Bug Fix: Uhost craches sometimes leaving the device busy
Bug Fix: Ankahv crashes on sharedfs operation
Bug Fix: subsequent clone/delete commands leave unreferenced state files
Bug Fix: User reported permission problem in anka create -a
Bug Fix: Tar fails to update modification date of symlinks over sharedfs
Bug Fix: Guest reboots during the installation of Homebrew
Bug Fix: During CI it’s observed an increased number of guest panics
Bug Fix: Anka registry add doesn’t work with self-signed certificates
Bug Fix: Ankahv crashes in xhci module
Bug Fix: Deadlock on boot
Bug Fix: Anka exception on registry operation
Bug Fix: Anka trust insecure registry
Bug Fix: Inefficient suspend
Bug Fix: 1.4 suspended Vm fails to start in 1.5(internal release)
Bug Fix: Anka view on 1.4 VM in 1.5(internal release) shows a black border at the bottom
Bug Fix: VM became stopped on suspend
Bug Fix: Anka usb list fails on new MBP2018
Bug Fix: Installation of macOS guest hangs in the middle
Bug Fix: Ios emulator fails to run
Bug Fix: Ios emulator causes a triple fault with nAnkaVM driver loaded and nanka engine
Bug Fix: Double cursor is displayed in anka view
Bug Fix: Anka vm doesn’t have networking after first boot (only after a reboot)
Bug Fix: Long running VMs crashing (probably due to resources/memory overallocation)
Bug Fix: Policy functionality is broken in very latest versions of Anka (Anka Secure Product related)
Bug Fix: Anka does not start the graphics driver with correct arguments
Bug Fix: Anka clone operation doesn’t check for policy rules producing unstartable VMs in negative scenario (Anka Secure Product related)
Bug Fix: Guest macOS v10.12 hangs on boot on Berry load
Bug Fix: License activation detecting 8core imac as 4 core
Bug Fix: After creating sierra VM network driver not loaded
Bug Fix: Enable policy without forcing user to stop VM (Anka Secure Product related)
Bug Fix: Vcpu_lock() deadlock
Bug Fix: Anka registry pull fails due to missing of policy file (Anka Secure Product related)
Bug Fix: Anka registry add doesn’t work with certificates
Bug Fix: Latest controller fails to start VM
Bug Fix: Issue with the registry for mac summary window during install
Bug Fix: Anka registry does not return right error for 403
Bug Fix: Swift build fails over a shared folder
Bug Fix: Switching to Keylocked Anka View (with e.g. Cmd+Tab) leaves the keys pressed on host side time to time
Bug Fix: osxfuse 3.3 (used currently) is not fully compatible with 10.14
Bug Fix: Uhost fails to pass-through some USB devices
Bug Fix: Anka View (2.0) crashed during live resize
Bug Fix: Host not reporting CPu core count during renewal/license exp call. previous core count is being overwritten.
Bug Fix: Installer hangs on 10.15 beta
Bug Fix: Ankactl crashes on start, stop, show operations on 10.15 beta
Bug Fix: AnkaView shows white box in 10.15 beta
Bug Fix: Anka create fails to create/configure the default user
Bug Fix: Image that was suspended for longer than 1 hour does not work in 10.15 beta VMs.
Bug Fix: “Anka View quit unexpectedly” when I turned off the VM through the Apple menu
Bug Fix: Failed to assign 256 bytes of key data, error 0
Bug Fix: Pull operation doesn’t update policy file reference in VM object (Anka Secure Product related)
Bug Fix: Fix typos
Bug Fix: Long boot of 10.15 beta
Bug Fix: Anka –debug registry pull –shrink issue
Bug Fix: Bad messaging for registry operations if no registry configured
Bug Fix: Better UID/permissions support in shared folders
New Feature: Massive performance optimizations
New Feature: Catalina VM support
New Feature: Secure controllable VM environments (Anka Secure Product related)
New Feature: New AnkaView application with multi-display support
New Feature: Unified Anka package
New Feature: Allow extending existing ANKA images
New Feature: New anka view screenshot command form
New Feature: Disable network discovery to prevent duplicate name dialogs
New Feature: Detect ssh session in anka view and inform the user about vnc
New Feature: Limit Anka View window size by desktop visible area
New Feature: Allow connecting multiple USB devices to VM
New Feature: Better TLS support in anka registry
New Feature: Ability to encrypt VNC password
New Feature: OpenID connect login support for anka registry
New Feature: Show creation/start/stop dates of VM
New Feature: Added ability to passthru/configure PlatformID and Serial Number to the VM
New Feature: Show license fulfillment information associated with a key with anka license command